fans

Highly efficient FIENI 820 DSV front-entry fan for kiwifruit. Designed to generate more air with lower horse power.

pump

Positive-displacement Annovi Reverberi (AR) BHS-170 high-pressure pump standard with brass head/bronze manifold for maximum corrosion resistance. Optional AR BHS-200 pump for higher volumes.

controls

Manual remote-mounted brass block controller as standard.

nozzles

Stainless steel spray rings fitted with brass roll-over nozzle bodies with 1 set (28) stainless steel disc and brass cores and 1 set (28) ALBUZ ceramic hollow cone nozzles to allow a wide choice of application rates.

tank

Low profile 2000-litre UV-stabilised polyethylene tank. Fitted with 120-litre flush tank and 4-litre handwash tank.

chassis/axle

Hot-dipped galvanised, full length chassis with adjustable draw bar and single step. Rear and side bumpers.

power required

Approx. 60 HP.

fans

Five individual Quantum Mist axial type fan heads in 420mm or 500mm sizes, plumbed hydraulically in series using oil supply from the tractor, controlled via a soft-start and oil control plus distribution block to the fans.

drive

Tractor PTO driveshaft to pump. Driveshaft supplied.

pump

Standard pump for all units is an AR-140LFP (132 L/min), 0–15 bar triple diaphragm pump

controls

Remote mount, five outlet, UCM controller with pressure gauge and pressure adjustment.

nozzles

• 500mm fan fitted with eight nozzle bodies and ALBUZ hollow cone nozzles 60º and 80o brown and yellow fitted as standard
• 420mm fan fitted with dual spray rings. Five nozzles per spray ring – ten nozzles in total. Manual shut off valve fitted to each spray ring for low, medium or higher volume rates.

tank

800 or 1000 litre polyethylene tank with main access lid, filling strainer and drain outlet. Integrated hand-wash tank (15 litre).

chassis

Heavy duty galvanised frame with cat. 1 and 2 linkage points on 800 litre and cat. 2 and 3 on 1000 litre.

boom

Galvanised hydraulic ‘x-fold’ boom is plumbed standard to fold simultaneously (optional left/right fold). Manual locking self-levelling device integrated into centre-section. Optional hydraulic height adjuster and airbag boom suspension .

fans

Individual QM-420 fans, hydraulically driven from the tractor hydraulics. The QM-420 fan delivers turbulent, high volume air for optimum canopy penetration and coverage.

tower

Single pole tower. Adjustable fan clamping brackets for precise fan positioning to the canopy.

drive

Tractor driven hydraulic oil supply is standard.

pump

AR-140 LFP positive displacement pump as standard.

controls

RM-40, 2 x tap remote mounted manual control. Manual pressure regulating valve and gauge. Optional electric control upgrade.

nozzles

10 x nozzles per QM-420 mm fan, available in 80, 60 and 40-degree options.

tank

High impact, UV-stabilised polyethylene 1000-litre tank fitted with separate flushing and fresh water tanks.

chassis/axle

Hot-dipped galvanised chassis with standard drawbar fitted. Optional Self-steering drawbar. Adjustable width axle fitted with 10.0/80 x 12 implement tyres.

fans

Individual QM-420 fans, hydraulically driven from the tractor hydraulics or via optional Micro Power Pack.

Dual spray ring allows for three-tier spray rate solution (low, medium and high), adjustable from the cab via the Fusion Controller as well as upwind/downwind fan speed compensation – an extremely effective system for improving spray coverage and minimising off-target spray.

fan frame

New design fan frame system offers added protection and allows for precise, simple fan position settings.

boom

Premium heavy-duty boom with parallelogram folding design. Position sensors control boom width via in-cab Fusion controller. Unique mounting bracket design allows fitting for 3-row outer fan frame or optional 2-row drift reduction/recapture system.

pumps

• AR-185 LFP as standard for 8 and 12 fan models.
• AR-250 LFP as standard for 18 fan and recapture models.

controls

Control sprayer and hydraulic functions through a single platform with the Fusion controller featuring full colour touch screen and integrated joystick. CANBUS technology with onboard diagnostics minimises downtime and is easily
upgraded via simple software updates.

nozzles

10 x nozzles per QM-420 mm fan, available in 80, 60 and 40-degree options.

tanks

High impact, UV-stabilised polyethylene tanks fitted
with separate flushing and fresh water tanks.

Available in 2000L, 3000L and 4000L models.

chassis/axle

Hot-dipped galvanised chassis with single step. Self-steer draw bar and tandem walking beam axles standard on all models. Optional flotation tyres for low compaction solution.

DRIFT REDUCTION/RECAPTURE SYSTEM

Optional system best suited to 2-row, cool climate
vineyard operations.

Improves vineyard spraying efficiency and minimises
off-target spray drift, especially during dormancy and early season sprays.

Dual screens reduce trash build up with recaptured spray being filtered prior to returning to the spray tank.

micro power pack

Compact, self-contained hydraulic oil supply system designed to drive QM-420 fans independent to the tractor hydraulic system.

Improves tractor efficiency and allows smaller model tractors to power Quantum Smart Spray models.

Equipped with a safety cut off switch, the MPP shuts down if the oil level drops. Optional biodegradable oil.

fans

Individual QM-420 fans, hydraulically driven from the tractor hydraulics or via optional Micro Power Pack.

Dual spray ring allows for three-tier spray rate solution (low, medium and high), manually adjustable from the ground.

Optional upwind/downwind fan speed compensation – an extremely effective system for improving spray coverage and minimising off-target spray (must have HV-4000 rate controller fitted).

fan frame

New design fan frame system offers added protection and allows for precise, simple fan position settings.

boom

Heavy-duty boom with excellent adjustability for varying row widths.

drive

Tractor-driven hydraulic oil supply is standard on all models up to 12 fans. Optional Micro Power pack.

pumps

• AR-185 LFP as standard for 8 and 12 fan models.
• AR-250 LFP as standard for 18 fan models.

controls

Electric controls. Two-section (left and right) with pressure adjustment from the tractor seat.

nozzles

10 x nozzles per QM-420 mm fan, available in 80, 60 and 40-degree options.

tanks

High impact, UV-stabilised polyethylene tanks fitted
with flushing and fresh water tanks. Available in 2200L, 3000L and 4000L models.

chassis/axle

Hot-dipped galvanised chassis with single step. Self-steer draw bar and tandem walking beam axles standard on all models. Optional flotation tyres for low compaction solution.

micro power pack

Compact, self-contained hydraulic oil supply system designed to drive QM-420 fans independent to the tractor hydraulic system.

Improves tractor efficiency and allows smaller model tractors to power Quantum sprayers.

Equipped with a safety cut off switch, the MPP shuts down if the oil level drops. Optional biodegradable oil.

fans

Individual QM-420 fans, hydraulically driven from the tractor hydraulics. The QM-420 fan delivers turbulent, high volume air for optimum canopy penetration and coverage.

Dual spray ring allows for three-tier spray rate solution (low, medium and high), manually adjustable from the ground.

tower

Heavy-duty rear tower with adjustability for varying row widths. Fans mounted in a new fan frame system, offering added protection and allowing for precise, simple, fan position settings.

drive

Tractor driven hydraulic oil supply is standard.

pump

AR-160 LFP positive displacement pump as standard. Optional AR-185 LFP pump for higher volume applications.

controls

Electric controls. Two-section (left and right) with pressure adjustment from the tractor seat.

nozzles

10 x nozzles per QM-420 mm fan, available in 80, 60 and 40-degree options.

tank

High impact, UV-stabilised polyethylene tanks fitted with flushing and fresh water tanks. Available in 1500L, 2000L and 3000L models.

chassis/axle

Hot-dipped full length chassis with single step. Self-steer draw bar and single fixed axle is standard on all models. Optional flotation tyres can be fitted for low compaction solution.

fans

Highly efficient FIENI 820 DSV front entry fan. Downstream straightening vanes. Designed to generate more air with lower HP.

pumps

Quality AR BHS-170 brass pump fitted as standard. Optional AR BHS-200 for higher volume applications.

controls

Fitted standard with HV-2400 auto rate controller.

nozzles

Brass roll-over nozzle bodies fitted, stainless steel disc and brass cores. Number will vary dependent on fan selection.

tank

2000L low profile tank

• Length 5580mm
• Width 1870mm
• Height 1370mm
• Dry weight 2,630kg.

operator station

Fully sealed and air-conditioned cab with carbon filters. Easy navigation with reversing camera and LCD display.

engine

4-cylinder turbo charged diesel engine.

transmission

• Mechanical drive
• 5 x speed manual with high and low range
• Single speed reverse
• Speed ranges from 1-24 km/hr
• Selectable 2 or 4-wheel mechanical drive
• Selectable 2 or 4-wheel steer (with auto-alignment and non-alignment indicator)
• Hydraulically operated 4-wheel disc brakes
• Supplied on 400 / 60 x 15.5 flotation tyres