The first fully integrated twin-tank, twin-line sprayer.

The WEED-IT 7000 takes weed control to the next level. Named after its 7000-litre main tank, it also includes an 800-litre flushing tank and 1500-litre hot tank, the latter of which holds high-concentration chemicals for spot spraying. This helps in the management of hard-to-kill weeds and inhibits herbicide resistance.

The WEED-IT 7000 has been engineered in Australia with Australia’s tough conditions in mind. From improved chassis and suspension system to the development of the contour-following boom, which is specifically designed so sensors target even the smallest weeds, every element has been made for high durability and productivity.

To reduce your chemical use, minimise weed seed banks while retaining soil moisture, look no further.

7000 Litre Main tank

7000-litre UV and chemical resistant polyethylene tank, fitted with hinged lid and controlled overflow plumbing, filling strainer, top fill and fully draining sump. Comes standard with dual agitators, direct chemical induction, tank rinsing facility and drain.

1500 Litre hot tank

1500-litre polyehtylene tank, fitted with dual lids and controlled overflow plumbing. Holds high concentration chemicals for spot spraying.

800 Litre flush tank

800 litre polyethylene tank, fitted with lid and controlled overflow plumbing. Bottom fill and fully draining sump.

chassis

• Heavy duty fabricated chassis with easy access walk over platform designed for maximum accessibility and safety
• Easy access to main tank lid
• Fitted standard with wide, low dust 24.5 – 32 tyres and wheels
• Standard axle is fixed track 3m axle with airbag suspension and automatic ride height valve
• Mudguards and mudflaps are standard
• Airbag suspension, heavy duty adjustable drawbar hitch with swivel cast eye and jack stand
• Optional hydraulic jack version
• Integral WEEDit boom connection points 
• 20 litre chemical drum rack
• Optional LED Lighting for fill station

CHemical handling

• 60 litre Chem-e-Flush 60 hopper with drop down leg for the Main tank
• Fixed Arag Niagra 30 litre hopper for the Hot tank
• Integrated suction probes (for each tank) transports chemical directly into the tank, without putting neat chemical through the pump

dual line plumbing

• Main tank/blanket line is a hydraulically driven Hypro centrifugal pump. This traditional 5 section line can be used both with and without the WEED-IT line. The blanket line only draws chemical from the main tank, but can be shut off when not required. The blanket line has traditional 110° nozzles at 50cm spacings.
• Hot tank/WEED-IT line is a Hypro centrifugal pump with LifeGuard seals. The WEED-IT line targets actively growing weeds and can be used on its own or in conjunction with the blanket line. The WEED-IT line can draw chemical from either tank depending on the application and has 40° nozzles at 25cm spacings.
• Fence line nozzles are fitted to both the blanket line and WEED-IT spot spraying line

fill and filtration

2” Self filling pump delivers water to the control panel Rotary valve filling main tank, hot tank or flush tank. Optional: Self filling 3” system . Multiple filtration points:

• Basket 18 mesh (main tank only)
• 2 x Filling 32 mesh
• 2 x Pressure 80 mesh
• Multiple 100 mesh boom in-line filters, fitted to the blanket line

controls

VISIO tank level display – a small in cab screen accurately displays the hot tank volume. Easy to use main control panel suitably positioned between both chemical hoppers. Hinged for easy access to plumbing.

in-cab monitor & controller

WEED-IT’s easy to use intelligent display provides constant monitoring of solenoids and sensor operations, with malfunctions or errors reported on screen – including warnings for low pressure, sensor faults and voltage.

The smart design allows for easy fault identifications. Response time is automated to ensure the nozzle hits the target.

Turn compensation is a standard feature.

Designed and manufactured in collaboration with Western Australia-based sprayer manufacturer Sonic Boomsprays, Sonic WEED-IT trailed sprayers are an alternative design to help control hard-to-kill weeds and delay the onset of herbicide resistance.

The cable-suspended hydraulic lifting boom is suitable in conditions where a ground-following boom would be compromised.

The Sonic WEED-IT range includes single and dual spray line models with either a 5000 or 7000-litre main tank.

WEED-IT can be retrofitted to any self-propelled, trailed or 3 point linkage sprayer.

Croplands WEED-IT Quadro retrofit sprayer kits utilise an alloy bracket to deliver reduced weight while also maintaining strength. Kits are custom designed for each boom.

Unlike competitor kits which require a large amount of engineering and re-plumbing to be fitted, the Croplands WEED-IT set is as efficient and intuitive as the WEED-IT’s performance.

WHY ADD A WEED-IT RETROFIT KIT TO YOUR SELF-PROPELLED, TRAILED SPRAYER OR 3 POINT LINKAGE SPRAYER?

• 25cm nozzle spacing
• PWM – individual nozzle control
• Section controller & mapping
• ISOBUS
• Narrower footprint meaning more savings on chemistry
• Chlorophyll fluorescence detection
• Accurate and precise detection
• Chemical savings up to 95%

Croplands range of WEED-IT equipped trailing sprayers are designed to deliver the ultimate results in weed detection and eradication.

Taking optical spot spraying to the next level, WEED-IT identifies and targets weeds with unrivalled accuracy, reducing herbicide use drastically as well as water, time and soil moisture. Tackling those hard-to-kill weeds to minimise the weed seed bank while maximising your return on investment.

With accuracy and precision in mind, Croplands have developed a range of trailing sprayers purpose-built for WEED-IT and spot spray targeting.

contour following boom

Croplands’ unique WEED-IT boom is designed to maintain even height above the ground to optimise weed detection and targeting. This boom can operate at five different planes to mirror the contours of the land as accurately as possible. This means that, with only small variations in height, the boom height is maintained to ensure WEED-IT sensors will target even the smallest of grasses.

The heavy-duty, hydraulic fold 24 and 36-metre contour following booms are designed to take on Australia’s challenging broadacre farming conditions. With custom engineered boom wheels equipped with air-ride suspensions, sensor effectiveness is maximised as compression and rebound is controlled.

Hydraulically steered innner-boom wheels control the folding and unfolding of the boom – also a pivot point for the boom to contour follow.

Cable-suspended sonic weed-it

Built in collaboration with Western Austalia-based manufactures, the Sonic WEED-It is an alternative design to help control hard-to-kill weeds and delay the onset of herbicide resistance.

The cable-suspended hydraulic lifting boom is suitable in conditions where a ground-following boom would be compromised, such as avoiding ground obstacles and where quick folding for constant road usage is required.