WEED-IT optical spot spraying has been instrumental in helping Australian farmers gain the advantage in weed management and control.

Using advanced sensors to detect chlorophyll in actively growing weeds in fallow fields, WEED-IT saves growers time and money when spraying and reduces overall herbicide usage. Croplands has led the charge in bringing WEED-IT to market with over 13,000 sensors sold into the Australian market alone.

Having distributed WEED-IT in Australia for nearly a decade, Croplands have built up a wealth of knowledge and runs on the board when it comes to advising and supporting end users and their consultants with their optical spot spraying programs.

While the sensors are manufactured in the Netherlands, Croplands has developed a range of best practice platforms specifically for Australian conditions and for Australian operators who are continually searching for field efficiencies.

The premium model in the Croplands WEED-IT range – the Croplands WEED-IT 7000 – features a 7000-litre main tank, 800-litre flushing tank and a 1500-litre hot tank. The latter of which holds high-concentration chemicals for spot spraying.

“Our Australian-designed twin-tank, twin-line sprayers allow growers to spot spray whilst also applying a blanket spray with the option of using different herbicides at different water rates to deliver excellent weed control

Steve Norton, Croplands Portfolio Manager.

“For example, a pre-emergent herbicide could be applied through the blanket line, while the spot spray line may apply a knockdown herbicide to existing weeds.”

“Another common strategy used to delay the onset of herbicide resistance is to use a concentrated mixture of chemicals and rotate between groups. The Croplands WEED-IT twin-tank, twin-line sprayers give growers the ability to engage both these strategies in a very economical fashion to target those hard-to-kill weeds,”.

In 2019 Croplands released the evolutionary WEED-IT Quadro, the next generation in spot spraying technology which uses blue near infrared sensors.

“WEED-IT Quadro’s superior mode of detection allows for faster travel speeds and the ability to target smaller weeds before they get harder to kill or go to seed,” says Steve.

WEED-IT Quadro sensors activate extremely fast 50Hz 6-volt PWM-capable solenoids – opening and closing 50 times per second – that in turn activate nozzles to hit the weed with a targeted spray. This is vital for accurate targeting of weeds in a range of weather and speed conditions, day or night.

Quadro sets a new standard for high-speed nozzle activation and accurate weed targeting.

Steve Norton, Croplands Portfolio Manager

“The sensors automatically calibrate 40,000 times per second to compensate for varying crop, soil and daylight conditions. They are also very efficient at night spraying.”

“25cm nozzle spacing coupled to 40 degree nozzles means that WEED-IT Quadro’s spray zone is optimised and more accurate than other optical spot sprayers.”

Other models in the Croplands WEED-IT trailed range include the cable-suspended hydraulic boom models made in collaboration with leading Western Australian manufacturers, Sonic, and the Croplands-designed models with 4000 or 6000-litre main tanks. All models have the option to upgrade to a twin-tank, twin-line configuration.

In 2020 Croplands boosted its WEED-IT range with the introduction of a three-point linkage model that was designed at its facility in South Australia.

“Over the past eight years, most WEED-IT platform developments have focused on trailing sprayers and smaller tool bars. Now we work more towards adapting a sensor platform that better suits row crop environments”, says Steve.

The three-point linkage sprayer is available with boom widths of 19m or 25m.

“Quadro sensors are fitted every metre across the boom with the first sensor placed on centre, which is ideal for row cropping,” Steve says.

Designed with a tank size of 1600 litres, the new linkage model offers other convenient features such as hydraulic lift, separate hand wash tank, and 80-litre flush tank for rinsing nozzles and boom lines.

Brothers David and Gordon Brownhill have understood the value of weed-sensing technology since the 1990s.

David says the latest spray technology is an essential tool for no-till broadacre farmers, and the pair has received an immediate financial return from their new trailed WEED-IT Quadro sprayer.

The Brownhill brothers are third generation farmers, who run Merrilong Pastoral Company. The farm on the Liverpool Plains in New South Wales has grown to 10,000 ha.

They run stock on 2000 ha and the rest is for cropping cotton, sorghum (for grain as a summer crop), corn, four types of wheat, barley, chickpeas and faba beans.

Gordon is general manager and David is business manager. They also have a farm manager and nine full time staff. Gordon’s son Hugh recently joined the business, becoming the fourth generation of Brownhills to work the land.

David says he first became interested in weed-sensing technology when the then Department of Agriculture was developing a system in Tamworth. He and Gordon bought an early prototype. It was not user-friendly.

However, in 1998, David won a Nuffield Scholarship and used the opportunity to visit California to see how spot-spray technology was being used with cotton.

That led David to form a company in 2001 to import weed-sensing technology on a 24m boom. He then changed tack, and used another version of the technology, until finally this year he bought the WEED-IT Quadro with a 36m boom.

He says the main reason he swapped to WEED-IT was its new blue light system. Earlier brands use red LED lights, but blue LED lights are more accurate at detecting the green of chlorophyll in plants, and they operate just as well at night.

The night operation matters as the Brownhills can spray glyphosate during the day and gramoxone at night, because the latter is more effective at night.

Their best effort has been 780 ha covered in 24 hours.

The WEED-IT system is compatible with most boom types and David and Gordon run theirs on a Hayes sprayer, made just over the border in Queensland.

We are super happy. It has been a great investment. The pay back has been crazy. In the first eight weeks we saved $157,000 off the weed bill.

David Brownhill, Merrilong Pastoral Company NSW

That massive savings was because after two years of drought there were minimal weeds – only about four percent cover. This meant they could spray their entire 8000 ha cropping area with the spot-sprayer to hit the hardy survivors, without wasting spray on barren areas.

“The guy running our spraying operation brought a proposal to the board. He did the maths and said we would pay it off in three years. The way it is going, it will be in two. It is one of the few bits of technology that gives you a return to the pocket straight away.”

David says integrated pest management (IPM) is stock standard for anyone in the cotton industry and they do practices such as winter and summer rotations and use targeted sprays where possible, which do not harm beneficial insects.

“I believe in science and technology and have no issues with herbicides and insecticides, but the less we can use the better,” he says.

Spot spraying is a perfect complement to IPM. It also means they can deal with hard-to-kill weeds by using higher concentrations, without breaking the bank.

The WEED-IT Quadro provides options. It can be specified with two tanks to apply two different chemicals on different rates. Or it can broadacre spray with one chemical while spot spraying with the other. WEED-IT sensors can also be retrofitted to several makes and models of self-propelled sprayers with kits specifically designed for each boom.

For David’s operation, he ordered a model with just one 4000-litre tank and only spot sprayers. He does have the option to add another tank later if required.

It is not a huge tank, but then when only spraying four percent of a paddock, you do not use much. It also means little time is wasted filling up.

Lochie, the night driver, fills up at say 6pm, and that tank usually lasts the night.

If he does need to fill up, there is a cage on the front with herbicide. He can fill up with water somewhere on the property, and the herbicide is ingested through the line into the tank. In this way, he is fully self-sufficient through the night.

Weed-detecting sensors on the WEED-IT boom are on 1m spacings. Each sensor controls four nozzles fitted with a high speed 50hz, 6v solenoid. The boom is 1.1m high to prevent shading of weeds and background calibration happens 40,000 times per second so there are no issues with accuracy in different soil conditions.

Crop rotations on the Brownhills’ farm see wheat harvested in December, and then 10-11 months fallow before replanting. During that fallow time, paddocks are sprayed on 4-6 week intervals.

David says the WEED-IT can work at about 13 kph, which allows them to cover 36 ha/hour. “The accuracy at 13 kph is sensational.”

The Quadro has five sensitivity settings and on Merrilong farms they always run on 1, the most sensitive. The WEED-IT system automatically calibrates as it goes.

How big does a farm have to be to justify this technology? “I could probably justify this on 2000 ha,” David says.

At Merrilong they use a 320-hp tractor to tow the Quadro, however David says that is really overkill and they could use 150 hp. The tractor used on the WEED-IT, also has other roles on the farm.

Croplands provides the back-up service for the WEED-IT Quadro.

“There are so many settings, and the guy from Croplands helps us make other choices, like when the nozzles turn off and on. It is an excellent process.”

Haydon Wass was looking for a solution to tackle problem weeds whilst also reducing the chemical load on his cropping property ‘The Plains’, Nyngan NSW.

A Croplands demonstration by Dave Farmer at a spray application workshop led Haydon and his son-in-law Adam to enquire at Western Farm Machinery about the WEED-IT optical spot sprayers. They were immediately impressed with the technology and in January took delivery of a Croplands WEED-IT 7000L with 36 metre boom.

Haydon along with his brother Michael crop 4400 hectares and grow a combination of wheat, canola, barley, chickpeas and lupins. Windmill grass and buttongrass are amongst the worst weed offenders in summer and sometimes require up to five sprays, depending on summer rainfall. Haydon is conscious of the environmental impact of reducing the chemical load and managing herbicide resistance within his cropping operation.

Regardless of whether we are saving money, from an environmental point of view, the less chemical going out, the better.

Haydon Wass

Up to 30 per cent of the property is left fallow each year so strategic weed management also plays an important role in preserving
ground cover.

“We leave between 1000 and 1500 hectares fallow each year, sometimes for up to fifteen months. Maintaining ground cover reduces the risk of losing precious top soil”.

Haydon uses an equivalent application rate of 100 to 120 litres per hectare at average travel speeds of between 13 and 15km per hour, depending on the size and stress of the weeds in the paddock.

Croplands recommends travel speeds of no more than 20km per hour to achieve best kill rates, particularly in grassy weeds where the weed’s surface area may be minimal and the plant can be easily stressed. The beauty of Croplands WEED-IT is the ability to economically use a higher concentration of chemical, a different mode of action or both, which is a major factor in eliminating hard to kill weeds and therefore delaying the onset of herbicide resistance.

Since taking delivery of his WEED-IT Haydon has sprayed over 7000 hectares with chemical usage rates averaging only 20% of a traditional blanket spray. In subsequent passes usage has been as low as 5%. The water saving has been over 550,000 litres which represents a huge saving in time, pumping and transporting.

Across 820 hectares, we used 2000L of water using the WEEDit compared to 82,000L that would have been used in a blanket spray. The tank filling time for 82,000L at 300-500L per minute, plus your time to transport this amount of chemical would have been huge.

Haydon Wass

Haydon has also been impressed by the quality and reliability of the machine which arrived on farm flushed and ready to go. The WEED-IT has been “trouble-free” with “not even a blocked nozzle”.

“WEED-IT has ticked a hell of a lot of boxes for us”

WEED-IT has ticked a hell of a lot of boxes for us

Haydon Wass

Tweets by "https://twitter.com/Croplands"

The Guest family uses a WEED-IT Quadro optical spot sprayer to limit chemical build up and deal with troublesome weeds on Thorburn, their farm north of Griffith, NSW.

The Guest family uses a WEED-IT Quadro optical spot sprayer to limit chemical build up and deal with troublesome weeds on Thorburn, their farm north of Griffith, NSW.

Rodney and Leonie Guest are the owners of the 2400-ha property, which mainly produces wheat, barley, and peas. Their daughter and son-in-law Tanaya and Sandy Nixon live on the farm. It is Sandy who operates the WEED-IT.

The soils on Thorburn are Mallee sandy loams with some sandy rises that have lower organic carbon levels. Rodney says they were finding residues of Roundup and 2,4-D building up in those low carbon areas, which limited following crops.

Legumes and canola are sensitive to spray and could not be planted on the sandier soils.

To reduce the amount of chemical they use, and therefore residue levels, is one reason why they decided to purchase the WEED-IT Quadro.

The Quadro is the latest version of the WEED-IT. It has new blue light sensors every metre along the boom and each sensor controls four nozzles. When it ‘sees’ the green of vegetation it directs spray solely at that weed.

The result has been a huge reduction in the amount of chemical they require.

Part of the farm rotation is to leave 400 ha fallow. This serves as a weed break and also conserves moisture for the next crop.

Sandy sprayed the fallow land, just after getting the Quadro in September.

I used just 25 litres of chemical spot-spraying, compared to 1000 litres if I had sprayed it all. There are huge savings to be made

Rodney Guest, “Thorburn”, NSW

He says cutting down the amount of spray the family uses is good for the soil, the environment, and the back pocket. In an increasingly regulated industry it’s all a positive, especially reducing the use of 2,4-D.

“It is a big advantage being able to use less chemical. We can afford to use more expensive chemicals that better target a troublesome weed.

“One of our problem weeds is feathertop Rhodes grass. Last summer to control it, we went out in utes most of the summer and chipped it out by hand.

“Now we are going to use the Quadro as we can afford a more expensive chemical, which has to go on at high rates.”

Sandy also hopes the Quadro will delay the development of herbicide-resistant weeds. At the moment they are just starting to see resistant ryegrass and they are hoping to get on top of it by spot spraying during the fallow rotation.

The Quadro has two tanks so it can blanket spray and spot spray at the same time. The main tank is 4000-litres and the hot tank for spot spraying is 1100-litres. Other models available include the WEED-IT 7000 with 7000 litre main tank and 1500 litre hot tank.

The two tanks can hold different chemicals and spray at different rates.

Sandy has yet to use this feature, but says in future he plans to spot spray weeds whilst blanket spraying pre-emergents.

“It gives us options. If a paddock is clean we can do the whole paddock at a low rate and if there is a scattering of weeds we can give them a bigger hit.”

When he is only spot spraying, Sandy uses the main tank for extra water. This means he does not have to make up as much spray at once.

He operates the WEED-IT at 15-20 kph. It has a 24m ground-gliding boom, so he can cover lots of ground in a day. Boom width on the larger WEED-IT 7000 is 36m.

The WEED-IT system of sensors can be added to any type of sprayer. The Guests purchased their trailed WEED-IT Quadro through their local Croplands dealer in Griffith.

Tweets by "https://twitter.com/Croplands"

Controlling problem summer weeds is essential to Sheldon and Rebecca Dalton’s cropping business, so they had no hesitation adding a new Croplands WEED-IT 7000 spot sprayer to their fleet.

The WEED-IT 7000 compliments their two RoGator RG1300 sprayers, which are used to blanket spray paddocks left to fallow, while the WEED-IT is used to mop up any remaining weeds. All three sprayers are supplied by Croplands.

“We haven’t used the WEED-IT a lot yet, but it is already showing us it will be a great addition to get those hard to kill weeds, without having to spray the whole paddock. So it is economical,” Sheldon says.

“We farm in a lower rainfall area, and we leave a certain percentage of paddocks each year that we don’t crop, so we can build up our moisture as a risk management tool. It is important that we don’t let weeds take over and the Weed-It has a fairly well proven record.”

The Daltons farm around 18,000 hectares in western New South Wales on flat and slightly undulating country. They get an average yearly rainfall of about 350 mm.

Because of the lower rainfall, they fallow about 30 percent of their paddocks each year to allow subsoil moisture to build up. Rhodes grass is a particular problem over the summer months, Sheldon says.

“In the summer we are having trouble with Rhodes weed. It’s becoming a pest and an expensive weed to eradicate with blanket spraying.

“But with the WEED-IT, we can target each weed individually without having to respray the whole paddock.”

Instead of spraying 100 percent of the paddock we might only need to spray 5-30 percent. It makes the process more economical and we know we are achieving targeted eradication.

Sheldon Dalton, “Tanderra”, Hillston NSW

Croplands has extensively tested and calibrated WEED-IT 7000 sprayers for Australian conditions. Last year they added the new Quadro sensor to the spot sprayers.

Quadro sensors used blue LED lights, which are more sensitive to weeds than red LED lights. This enhances the sprayer’s accuracy and ability to get the job done.

With WEED-IT technology farmers and contractors can delay the onset of herbicide resistance, lower the weed seed bank and improve water retention, while making substantial chemical savings, which are all things the Daltons wanted to achieve.

They bought their WEED-IT from the Croplands dealership, Intersales in Griffith, NSW, which is about 90 km from their farm.

Sheldon and Rebecca farm with their sons Bellamy and Kaleb at ‘Tanderra’, near the town of Hillston.

The family owns and leases a total area of 35,000 ha, including 18,000 ha of farmland. The balance is in Mallee forest land, which is ideal for hunting wild pigs and deer.

Their home block of Tanderra includes 12,000 ha of farmland from 11 adjoining properties, while there are a couple of lease blocks located up to 30 km from Tanderra.

The Daltons’ farming operation is mainly arable. They grow wheat and barley for grain, and add peas and vetch legumes to the cropping programme to build up nitrogen in the soil. They also run a commercial herd of Angus cattle.

After the challenges of successive dry seasons in recent years, the Daltons are enjoying a good season with nearly 400 mm of rain so far this year, ahead of the average yearly rainfall of 350 mm.

“We got through alright last year. We had a couple of good rains at the end of the previous year and just before sowing, so we had a good crop. But we had a couple of dry years before that.”

Sheldon says the two RoGator RG1300s are the operation’s two main sprayers and are used for pre-sowing spraying, as well as blanket spraying of fallow paddocks. They are well complemented by the WEED-IT 7000.

He bought the first RG1300 about four or five years ago and added the second one last year.

Tweets by "https://twitter.com/Croplands"